1. Rectangles and squares
Measure the length and width with a tape. Area = length × width. A 12 × 8 ft bed is 96 sq ft.
2. Circles
Measure straight across the middle to get the diameter. Area = π × (diameter ÷ 2)². A 10 ft round bed is 3.1416 × 25 = 78.5 sq ft.
3. Triangles and corners
Measure the base and the height at right angles to it. Area = base × height ÷ 2.
4. Irregular shapes
Split the space into rectangles, circles and triangles, work out each area, then add them up. Use the calculator’s “I know the area” option with the total. For curvy beds, a slight over-estimate is safer than an under-estimate.
5. Choose the depth
Decide how deep the finished layer should be and measure it in inches or centimetres. Remember that loose materials settle. If you are filling a hole or a raised bed, measure the depth at a few points and use the average.
6. Convert to volume
cu ft = sq ft × (inches ÷ 12) cu yd = cu ft ÷ 27 m³ = m² × (cm ÷ 100)Then pick the material on the calculator to see weight and bag count.
Common mistakes
- Entering depth in feet when you meant inches.
- Measuring a sloped bed along the slope instead of the flat plan size. For gentle slopes it makes little difference.
- Forgetting that mixed units must be converted: 6 ft 6 in is 6.5 ft.